view cart menu separator categories menu separator faq
advanced search
categories  > Development boards > ATMEL AVR boards (12)
AVR-CAN AT90CAN128 ATMEL prototype board: CAN, RS232 UART, JTAG, ISP
3 images
 
AVR-CAN AT90CAN128 ATMEL prototype board: CAN, RS232 UART, JTAG, ISP
AVR-CAN AT90CAN128 ATMEL prototype board: CAN, RS232 UART, JTAG, ISP
AVR-CAN AT90CAN128 ATMEL prototype board: CAN, RS232 UART, JTAG, ISP

AVR-CAN AT90CAN128 ATMEL prototype board: CAN, RS232 UART, JTAG, ISP

Price: $49.00 currently not available     
Feedback: 98.28%, 220 sales Ask seller a question
Shipping: US-Mainland: $5.50 (more destinations)
Seller's Country: Ukraine
Condition: Brand new
Payment Options: Money Order, Cashier's Check, Personal Check,
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
AVR-CAN is inexpensive way to learn AT90CAN128 microcontroller from Atmel. It's in very compact form 60x55mm and the presence of both CAN and RS232 allow the customer to make bridge between UART and CAN networks. All AVR pins are available on extension connectors and the board can be easy snap-on prototype or other mother board where additional circuits are built.

FEATURES

* MCU: AT90CAN128 - 128Kb Flash, 4Kb EEPROM, 4Kb SRAM, 53 GPIO, 32 working registers, a CAN controller, Real Time CLock, four Timer/Counters with PWM, 2 UARTs, Two-wire Serial Interface, an 8-chanel 10-bit ADC, Watchdog Timer, SPI serial port, JTAG interface, five selectable power saving modes
* 5x2 pin JTAG connector for programming and debugging with AVR JTAG ICE
* 5x2 pin ISP connector for programming with AVR ISP programmer
* RS232 DB9 female connector and driver
* CAN connector and interface
* User button
* Status led
* 8MHz oscillator circuit
* 32768 Hz oscillator circuit
* Reset button and circuit
* On board voltage regulator (+5V)
* Power supply led
* Power supply connector
* extension pin headers for each uC pin
* FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
* Dimensions: 60x55mm (2.36x2.16")

POWER SUPPLY CIRCUIT:
Power should be applied to power supply connector. AVR-CAN could be powered by applying up to 9VDC (5 to 9 VDC) to EXT1-1 and EXT1-2 and GND to EXT1-3 and EXT1-4 or if you supply 5 to 9 VDC to central pin of POWER SUPPLY connector and GND to external pin of this connector
The consumption of AVR-CAN is about 40-50 mA.

RESET CIRCUIT:
AVR-CAN reset circuit is made with R16 (10k) pull-up, button RST and the voltage supervisory device MCP120T-300 which on RST button pressed resets the AT90CAN128.


CLOCK CIRCUIT:

* Quartz crystal 8 MHz is connected to AT90CAN128 pin 24 (XTAL1) and pin 23 (XTAL2).
* Quartz crystal 32.768 kHz is connected to AT90CAN128 pin 19 (TOSC1/PG4) and pin 18 (TOSC2/PG3) and supplies the internal Asynchronous Timer/Counter (Timer/Counter2 in asynchronous operation).

JUMPER DESCRIPTION:

* CAN_D: CAN Disable. If this jumper is closed, the CAN is disabled. Default state is open.
* CAN_T: This jumper assures correct work of the CAN. At each end of the bus it should be closed. This means that if you have only two devices with CAN, the jumpers of both devices should be closed. If you have more than two devices, only the two end-devices should be closed. Default state is closed.
* AVREF_E: This jumper when closed supplies VDDA reference to the AVREF. If this jumper is open the desired reference voltage should be applied at EXT2-3. Default state is open.

INPUT/OUTPUT:

* Status LED (red) with name STAT connected to AT90CAN128 pin 6 (OC3B/INT4/PE4).
* Power-on LED (red) with name PWR_LED – this LED shows that +5V is applied to the board.
* User button with name BUT connected to AT90CAN128 pin 7 (OC3C/INT5/PE5).
* Reset button with name RST connected to AT90CAN128 pin 20 (#RESET).

Documentation:

* AVR-CAN schematic (http://www.bravekit.com/document/AVR_boards/AVR_CAN/AVR-CAN_schem.pdf)
* AVR-CAN components placement (http://www.bravekit.com/document/AVR_boards/AVR_CAN/AVR-CAN_component_placement.pdf)
* AT90CAN128 datasheet (http://www.atmel.com/dyn/resources/prod_documents/doc7679.pdf)

Software:

1. Software examples for AT90CAN128 (writen for WinAVR). This lib contain all functions and examples for getting started with AT90CAN128 microcontroller - see http://www.atmel.com/dyn/resources/prod_documents/at90CANLIB_3_2.zip
2. AVR-CAN Blinking LED demo code (C source and HEX) - http://www.bravekit.com/document/AVR_boards/AVR_CAN/avr-can_Led.zip and http://www.bravekit.com/document/AVR_boards/AVR_CAN/avr-can_Led.hex
3. AVR_CAN Button read demo code (C source and HEX) - http://www.bravekit.com/document/AVR_boards/AVR_CAN/avr-can_Button.zip and http://www.bravekit.com/document/AVR_boards/AVR_CAN/avr-can_Button.hex

What included

* AVR-CAN prototype board, assembled and tested
Other Products from mcuboards:View all products
PIC Microchip PIC-P18 prototype board - ICD 2, ICD2, PICkit2, JDM...
$7.00
AVR-I/O IO DEVELOPMENT BOARD WITH 4 OPTOISOLATED INPUTS AND 4 RELAY OUTPUTS.
$25.00
V2 debug module: programming debugging FTDI USB VNC2 chips (for USB flash drive)
$18.00
ATMEL AVR PROTOTYPE BOARD ATMega8 ATmega88
$7.80
STM32F103 Cortex-M3 ARM stamp development board 512k JTAG SWD
$25.00
VDRIVE1-Vinculum FTDI USB Flash Drive interface VNC1L Connect USB FLash to MCU
$32.00
Simple in-system programmer ATMEL AVR ISP AVRISP !!Free air shipping!!
$18.50
"PIC DIP Programmer" - extension module to PICkit2, ICD2  for programming PIC, EEPROM in DIP
$18.50
PIC Microchip PIC-P18 prototype board with components - ICD2, PICkit2, JDM...
$17.00
MMA7660FC accelerometer module with level-shift circuit
$11.98
Last Updated: 1 Jul 2016 02:09:08 PDT home  |  about  |  terms  |  contact
Powered by eCRATER - a free online store builder